Summit EQP-200B

Specifications

Output: +4 dBu corresponds to 0 VU. The output is electronically balanced or unbalanced using 990 operational amplifiers. Output impedance is 75 ohms. The recommended output load is 75 or more. Maximum output level is +25 dBu.

Input: The input is electronically balanced with an input impedance of 40k ohms

Distortion: 0.05%, at +4 dBu (unweighted)

Frequency response: 5 Hz to 100 kHz

Noise: Better than -80 dB relative to 0 VU

High frequency attenuate: 5, 10, 20 kHz; 0 to -17 dB

Mid-high frequency boost: 1.5, 3, 4, 5, 8, 10, 12, 16 kHz; 0 to 20 dB

Low frequency boost: 20, 30, 60, 100, 180 Hz; 0 to 16 dB

Low frequency attenuate: 20, 30, 60, 100, 180 Hz; 0 to -20 dB

Low frequency shelf/in/out: 6 dB per octave shelving filter starting at 50 Hz

Panel Size: Standard 19″ by 3.5″ (2 units of rack space)

Depth: 10.5″ in addition to user’s I/O cabling

 

Description

The Summit EQP-200B, like their DCL-200, uses both solid state and tube technologies in order to create a warm sound (tubes) with a clean, low noise equalization (solid state). The best of both worlds, the EQP-200b is a passive tube EQ that is very accurate and functional on all source material. This equalizer was designed after the original Pultec EQ, but has Jensen 990 transformers on the output stage that provide a clear, open sounding equalizer that does not have the phase anomalies inherent in active EQ circuits.